Return shipping covered
Contiguous US
Pneumatic lift
Michigan
The Nimbus
Nimbus is a pneumatic standing desk for workstations that stay mostly consistent. Fixed gas-spring assistance moves the desk from sitting to standing in under three seconds, with no motor, outlet, or lift tuning.
-
Worksurface Finish
-
Urban Oak $0.00
-
Dover White $0.00
-
Graphite Twill $0.00
-
Neutral Twill $0.00
-
Walnut $0.00
-
Natural Beech $400.00
-
Mocha Beech $400.00
-
-
Frame Color
-
Black $0.00
-
White $0.00
-
-
Accessories
-
Casters $55.00
-
Cable Management $40.00
-
Return shipping covered
Contiguous US
Pneumatic lift
Michigan
Change height in under three seconds
Press the release handle beneath the work surface and guide Nimbus up or down. Release the handle when you reach the height you want. Gas springs assist the movement, so no motor or outlet is required.
Press and hold the handle while moving the desk. Release it to stop the desk at your preferred height.
For the setup
you know.
Your monitors, your laptop, your everyday essentials. Nimbus is made for a workstation that stays fairly consistent.
Move between sitting and standing by hand, with no motor, no outlet for the lift, and no lift-assistance tuning.
Planning to add or change substantial equipment? Klöud offers adjustable lift assistance.
Choose fixed or adjustable lift assistance
Nimbus is our fixed-assistance pneumatic desk for workstations that stay mostly consistent. Klöud is our adjustable pneumatic desk for lighter, heavier, or changing setups. The two models use similar frames and share the same 28.25–48 in height range. The choice is whether you want fixed assistance with no tuning or assistance you can retune.
Lift setting
Fixed at 110 lb total setup weight
Adjustable from 60–150 lb
Recommended for
Equipment that will stay mostly consistent
Lighter, heavier, or changing equipment
Setup
No lift tuning required
Tune for the combined weight of the surface and equipment
Electricity
No outlet required
No outlet required
Nimbus specifications
Use these measurements to confirm that Nimbus fits your room, equipment, and preferred sitting and standing heights.
Values shown here are specific to the current product. Compare models when you need a different footprint, working range, or lift profile.
Additional information
| Adjustment System | Pneumatic |
|---|---|
| Pneumatic setup weight | Fixed, 110 lb total setup weight |
| Equipment allowance | Approximately 50 lb with the standard 60 in work surface |
| Height range | 28.25–48 in |
| Recommended work surface | 30 × 60 in |
| Structural load capacity | 500 lb |
| Travel time | Under 3 seconds from sitting to standing |
| Standard work-surface thickness | 1.125 in |
| Customer-supplied work surface | Compatible; use a similar size and weight |
| Product testing | ANSI/BIFMA X5.5 |
Choose laminate or solid hardwood
Laminate uses an MDF core with a laminated surface and is a practical choice for offices, classrooms, and shared spaces. Stained solid hardwood offers natural grain and a more premium finish for a home workspace.
Both options measure 30 × 60 in and are pre-drilled for the Nimbus frame. Hardwood color and grain vary naturally.
You can install your own work surface. For the most predictable movement, choose a surface close to the size and weight of the standard Nimbus surface. A lighter or heavier surface changes the amount of equipment the desk can balance.
Laminate finishes
Choose from Urban Oak, Dover White, Graphite Twill, Neutral Twill, or Walnut.
Solid hardwood
Choose Natural Beech or Mocha Beech. Each surface has its own grain and color variation.
Natural variation in every hardwood surface
Color and grain vary from one hardwood surface to the next. Compare the available finishes before making your selection in the configurator.
Shipping and assembly
We aim to ship within 1–2 business days. It arrives in two boxes: one for the frame and one for the work surface.
See the compatible Caster Set and Cable Management options.
If anything arrives damaged or missing
Contact our team. We will send replacement parts or replace the affected item.
A verified Nimbus owner review
Adam L. · Verified Buyer
The Nimbus customer reviews
Interactive reviews require JavaScript and optional cookie consent.
Is Nimbus right for your setup?
Nimbus is a good choice when you want pneumatic height adjustment without an outlet or lift tuning, and your equipment is unlikely to change substantially.
How much equipment can I place on Nimbus?
With the standard laminate work surface, Nimbus provides an approximate 50 lb equipment allowance. The lighter hardwood surface provides approximately 70 lb. Equipment weights vary, so check the combined weight of your monitors, computer, and accessories if your setup is close to the allowance.
What happens if I change my equipment?
Small changes may have little effect. Adding or removing a monitor, desktop computer, printer, or another large item can change the balance because Nimbus cannot be retuned. Klöud is our adjustable pneumatic desk for lighter, heavier, or changing setups; its lift assistance can be retuned when your equipment changes.
Can I use my own work surface?
Yes. Nimbus can accept a customer-supplied surface, but its weight affects the equipment allowance and how the desk moves. A surface close to the standard Nimbus size and weight will provide the most predictable experience.
What if Nimbus is not right for me?
You can try Nimbus for 30 days. If it is not the right fit, we cover return shipping and help coordinate the return. Nimbus also includes a five-year limited warranty.